An amateur station using radiotelephony emission must:
  1. ensure that the transmitter does not exceed 100% modulation and 6 khz bandwidth 2. have a reliable method to monitor the output power 3. display the transmitter output frequency on a frequency counter 4. be able to determine the occupied bandwidth of a transmitter at all time

Amateurs may use which of the following for operation of model control:
1. 50 to 54 mhz only 2. 50 to 54, 144 to 148 and 220 to 225 mhz only 3. all amateur bands below 4 mhz 4. all amateur frequency bands above 30 mhz

Radiocommunications transmitted by stations other
than a broadcasting station may be divulged or used:
1. if it is transmitted by an amateur station 2. during peacetime civil emergencies 3. if transmitted by any station using the international morse code 4. if transmitted in english or french

The bandwidth of an amateur station shall be determined by measuring the frequency band occupied by that signal at a level of _____ db below the maximum amplitude of that signal.:
1. 13 2. 26 3. 39 4. 52

The callsign of an amateur station must be sent:
1. every minute 2. once after initial contact 3. every fifteen minutes 4. at the beginning and end of each exchange of communications, and no longer than 30 minutes while in communication

The maximum bandwidth of an amateur station's transmission
allowed in the band 28.0 to 29.7 mhz is:
1. 6 khz 2. 15 khz 3. 20 khz 4. 30 khz

The maximum power input to the final stage of an amateur transmitter, when the operator is the holder of both the basic and advanced qualifications is:
1. 250 watts 2. 500 watts 3. 1000 watts 4. 1500 watts

There is only one amateur band on which radiotelephone
is not allowed. That amateur band is:
1. 7.9 to 7.3 mhz 2. 10.10 to 10.15 mhz 3. 18.068 to 18.168 mhz 4. 24.89 to 24.99 mhz

When operating on frequencies below 148 mhz:
1. the bandwidth for any emission must nmot exceed 3 khz 2. an overmodulation indicator must be used 3. the frequency stability of the transmitter must be at least 2 ppm over one hour 4. the frequency stability must be comparable to crystal control

Two morse code qualifications are available for the
amateur operator's certificate. They are:
1. 5 and 10 wpm 2. 5 and 12 wpm 3. 7 and 12 wpm 4. 5 and 15 wpm